Configure Your Pack

Battery Designer

Adjust parameters below. Dimensions and specs update in real time based on actual cell geometry.

Configure standard battery loadouts and get instant sizing and a downloadable CAD model across voltage, capacity, chemistry, and connectors. This tool is the entry point — AMP builds to mission. If your application calls for a custom form factor, specialized BMS, hardened environmental specs, or anything outside these menus, contact us.
Known Compartment Dimensions battery must fit inside
Enclosure Design
V2 Stainless
304 stainless · 14ga
Pack Profile
Cells lie flat in an aluminum plate shell, so the pack is 50 to 150 mm tall. These packs are quoted by AMP: send a request and we reply with pricing and lead time.
Chemistry
LFP
3.2V · 6,000 cycles · 1C/2C · Best for AGV
NMC
3.65V · 1,000 cycles · 1C/3C · High energy density
LTO
Contact AMP for the cell and protection profile
Na-Ion
Contact AMP for the cell and protection profile
Nominal Voltage
Voltage 48 V
Capacity
Capacity 100 Ah
Low Profile Layout
Shell Material
Output Connector
BMS
Internal Cell Layout
Single Stack
All cells in one row · longer pack
Double Stack
Two rows side by side · shorter pack
Mounting Orientation
Upright
standard floor mount
90° Left
side mount · inverted cover
90° Right
side mount · inverted cover
BMS Location
Standard
BMS mounts through front face
Lid
BMS mounts on top cover
BMS Orientation
Standard
stock module clocking
Rotated 180°
module spun on its mount face
Connector Options
SB50
SB175
SB350
Euro 80
CAN Communication
Include CAN communication charger / display / controller
Power Switching
Contactor disconnect two contactors replace the BMS switching stage · 300 A continuous
Pack Color
Stainless
Black
Red
White
Blue
Order Quantity
packs
Fabrication and assembly setup is spread across the order, so the per-pack price falls as the quantity rises.
Configuration Code
—
Have a code? Enter it to load that configuration:
Download CAD Package Request Low Profile Quote
Loading 3D model...
Configuration Summary

Download Your CAD Package — Free

For LFP and NMC configurations, get the production STEP model, CAN integration profile, and safety & handling sheet — packaged with a reference number.

Designed & built in Wisconsin, USA
Instant STEP CAD for released configurations
Trusted by Fortune 500 manufacturers
  • STEP CAD model of your enclosure — drop it into your machine design to verify fit, mounting, and connector access
  • CAN Bus integration profile (PDF) — plan charger / display / controller communication
  • Safety & handling sheet (PDF) — storage, installation, and transport guidance
  • Reference number — our engineering team keeps your full configuration on file under it, ready to quote

Use the Download CAD Package button on the 3D preview above to get your files.

Need pricing? Your download includes everything except pricing. Email [email protected] with the reference number from your package (or call 262-394-6822) and our team will reply with a formal quote and lead time.

Generating your CAD package can take up to a minute. Please keep this tab open — your download will start automatically and you'll see your reference number when it's done.

Low profile packs are quoted by AMP

The configuration you chose is sent to our engineering team with a reference number. We reply by email with pricing, lead time and the drawing for this layout. The size, weight and layout on this page are the ones we quote from. You can save the configuration code below the controls to bring it back later.

Request low profile quote  →